Experimental and numerical investigation of zirconium jet performance with different liner shapes design

This paper studies the shaped charge jet performance in terms of different liner shapes including conical,bell,hemispherical and bi-conical liners.The critical angles and the relevant flow velocities for the zir-conium liner material were calculated analytically and numerically using Autodyn hydro-code.The relationship between the critical collapse angle and the flow velocity was determined for the conditions of jet formation and coherency.Penetration tests according to the standard testing procedures of API-RP34 (Section-Ⅱ) were performed to validate the numerical predictions of the jet performance of the studied liners.It was found that the four shaped charge liners all produced coherent jets with different performances.The penetration depth of the shaped charges with the bell and the bi-conical liner shapes increased by 10.3％ and 22％,respectively,while the crater diameter of shaped charge with hemispherical liner increased by 85％ representing the formation of an explosively-formed-projectile (EFP),when they are compared with the corresponding jet characteristics of a conical liner shaped charge.     

Analysis of parameter estimation using the sampling-type algorithm of discrete fractional Fourier transform

Parameter estimation is analyzed using two kinds of common sampling-type DFRFT (discrete fractional Fourier transform) algorithm. A model of parameter estimation is established. The factors which influence estimation accuracy are analyzed. And the simulation is made to verify the conclusions. From the theoretic analysis and simulation verification, it can be drawn that, for the estimation of chirp-rate and initial frequency, Pei's method [10] is more suitable if the absolute value of chirp-rate is small relatively; Ozaktas' method [9] is more suitable if the absolute value of chirp-rate is large relatively; and the two methods are both workable if the absolute value of chirp-rate is moderate. The scope of moderate chirp-rate can be approximately determined as [40 Hz/s, 110 Hz/s].     

量子雷达及其目标探测性能综述

量子技术与传统技术相结合以提升经典系统性能是近年来电子信息、计算机技术等众多科学领域研究热点。由于隐身和电子对抗技术的进步和日益成熟,雷达作为一类典型的电子信息系统,其目标探测受到了越来越多的挑战。从雷达目标探测角度出发,介绍了量子雷达的基本概念与分类、若干实现模型,重点剖析、归纳了量子纠缠等量子效应增强雷达目标探测性能的物理机理与研究现状,指出了量子雷达研究和实现中的关键技术与研究方向。     

基于几何法和信息融合的2D雷达目标高度估计

在由 2 D雷达组成的雷达网中 ,首先用几何方法得到了 2个目标高度估计值 ,然后利用信息融合思想 ,在最小均方误差估计准则下得到了目标高度估计融合值及其方差表示。仿真计算表明 ,基于融合方法得到的高度估计较之只用几何方法得到的高度估计 ,性能得到了明显的提高。     

可供实用的舰船风浪中摇荡时历预报的模式

舰船在风浪中摇荡时历的极短期预报 ,具有多方面的实用价值 .现有的各种预报方法中 ,以卷积法和时间序列法中的ARMA模型较为常用 ,但如何测量艏前波是上述方法实施的前提条件 ,则未能解决 .文中提出的在舰船舯部装塔克测波仪 ,将所测波形时历转换为艏前任意点波形时历的方法 ,可解决上述矛盾 .再采用ARMA建模、依AIC法则估计模型阶数的预报方式 ,即可用于实船进行摇荡时历短期预报     

最小交互熵谱估计在反坦克导弹系统仿真模型验证中的应用

针对反坦克导弹系统动态过程仿真的输出具有短时序、低信噪比的特点 ,研究了应用最小交互熵谱估计验证导弹系统仿真模型有效性的方法 ,并结合某型号滚转稳定的反坦克导弹系统的仿真数据和理论计算数据给出了最小交互熵谱估计的应用结果。     

相似系统间调整因子的量化方法

探讨一种便于操作、系统而量化的方法 ,以预计新研系统的可靠性参数。在相似设备法的基础上 ,提出了利用可量化的调整因子对相似系统的可靠性参数进行转换的方法 ,有效地提高了相似设备法的可操作性和分析精度 ,对研究相似设备法在工程技术领域的应用也具有一定的参考价值     

防空武器火控系统对空中目标参数估计方法仿真

针对防空武器火控系统的特点,提出了一种防空武器火控系统对空中目标参数估计的方法,可以在不知道目标距离的条件下得到目标的航向角与俯仰角,实现对目标的被动式跟踪,对估计误差的统计特性进行了分析,仿真结果表明了该方法比传统的估计方法更加可行.     

The logistic–exponential survival distribution

For various parameter combinations, the logistic–exponential survival distribution belongs to four common classes of survival distributions: increasing failure rate, decreasing failure rate, bathtub‐shaped failure rate, and upside‐down bathtub‐shaped failure rate. Graphical comparison of this new distribution with other common survival distributions is seen in a plot of the skewness versus the coefficient of variation. The distribution can be used as a survival model or as a device to determine the distribution class from which a particular data set is drawn. As the three‐parameter version is less mathematically tractable, our major results concern the two‐parameter version. Boundaries for the maximum likelihood estimators of the parameters are derived in this article. Also, a fixed‐point method to find the maximum likelihood estimators for complete and censored data sets has been developed. The two‐parameter and the three‐parameter versions of the logistic–exponential distribution are applied to two real‐life data sets. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

What you should know about simulation and derivatives

Derivatives (or gradients) are important for both sensitivity analysis and optimization, and in simulation models, these can often be estimated efficiently using various methods other than brute‐force finite differences. This article briefly summarizes the main approaches and discusses areas in which the approaches can most fruitfully be applied: queueing, inventory, and finance. In finance, the focus is on derivatives of another sort. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008